B02Y36

Micro-Miniature IEPE Accelerometer
Triaxial
Sensitivity: 10mV/g
Range: ±500g
Frequency (5%): 5-8k Hz
Temp Range: -50~100°C
Connector: Integral Cable
Mount: Adhesive

Fast Lead Time

Datasheet (PDF): B02Y36

SKU: B02Y36 Categories: Accelerometers, IEPE, Miniature, Triaxial

IEPE Ultra-Miniature Triaxial Accelerometer · Integral cable

Overview

The B02Y36 is a ultra-miniature triaxial IEPE accelerometer built on a piezoelectric ceramic shear structure with a custom ASIC signal conditioning circuit. With 10 mV/g sensitivity and a ±500 g range it is the higher-sensitivity model of the pair, giving a lower noise floor for general vibration testing on very small or light test articles. Typical uses include powertrain NVH, small-component and PCB testing, environmental stress screening and tests where installation space is limited.

Shape-memory alloy fasteners are used throughout, and the laser-welded low-density titanium-alloy housing keeps the whole sensor to a 6.4 mm cube weighing 1 g. An integral high-temperature cable and adhesive base mount make it easy to install where a threaded stud is impractical, and it delivers simultaneous X, Y and Z data from a single mounting point.

10 mV/g

Sensitivity (±20%)

±500 g

Measurement range

5 – 8k Hz

Frequency range (±5%)

−50 to +100 °C

Operating temperature

1 g

Weight

6.4 mm cube

Titanium alloy, IP68

Why engineers choose the B02Y36

Ultra-low mass

At 1 g and 6.4 mm cube, the B02Y36 adds almost no mass loading, so lightweight structures, small components and PCBs behave as they would unloaded, and it fits where nothing else will.

Custom ASIC electronics

A highly integrated ASIC gives a low-impedance IEPE output with 2–20 mA constant-current excitation. Spectral noise of 40 µg/√Hz at 100 Hz and 0.001 g rms broadband resolution.

Adhesive-mount titanium cube

Laser-welded titanium-alloy cube sealed to IP68 with shape-memory alloy fasteners, rated to 1,500 g rms vibration and 2,000 g pk shock. Adhesive base mount for fast installation on any flat surface.

Typical applications

Drop testing and package testing
Powertrain NVH measurements
Vibration tests on space-constrained or lightweight components
Testing of small components and PCBs
Environmental stress screening (ESS)
Satellite and aerospace component testing

What’s in the box

B02Y36 triaxial accelerometer with integral K00BB05-1M high-temperature cable (1 m)
Product calibration certificate

Options & accessories

Integral high-temperature cable – supplied as K00BB05-1M (1 m, BB type) by default; other lengths and terminations available – use the Cable Builder or contact us
Recommended mounting base H03C60
Adhesive mounting – see the installation guide for recommended adhesives and surface preparation

Key specifications

Full specifications in the datasheet (PDF) →

Sensitivity (±20%)

10 mV/g (1 mV/(m/s²))

Measurement range

±500 g

Broadband resolution

0.001 g rms

Frequency range

5 – 8k Hz (±5%) · 2 – 10k Hz (±10%)

Resonance frequency

≥ 50 kHz

Transverse sensitivity

≤ 5%

Excitation

20 – 30 VDC, 2 – 20 mA

Output bias voltage

8 – 12 V

Spectral noise (10 / 100 / 1000 Hz)

150 / 40 / 20 µg/√Hz

Vibration / shock limit

1,500 g rms · 2,000 g pk

Connector / mounting

Integral cable K00BB05-1M (customizable) · adhesive

Size / weight

6.4 mm cube · 1 g

Sensitivity measured at 160 Hz, 24 VDC, 4 mA. Typical values. Vibration and shock limits per JBT 6822-2018 7.12.1 and refer to the sensor surviving in a non-powered state.

Other models in the Y36 family

Same ultra-miniature titanium housing, custom ASIC and integral high-temperature cable across the family. Choose the sensitivity, range and base isolation that fit your test.

Model	Sensitivity	Range	Frequency (±5%)	Size · weight	Base isolated
B01Y36	5 mV/g	±1,000 g	5 – 10k Hz	6.4 mm cube · 1 g	None
B02Y36This model	10 mV/g	±500 g	5 – 8k Hz	6.4 mm cube · 1 g	None
B01YG36	5 mV/g	±1,000 g	5 – 8k Hz	7.8 × 7.8 × 7.1 mm · 1.5 g	Yes (shell)
B02YG36	10 mV/g	±500 g	5 – 6k Hz	7.8 × 7.8 × 7.1 mm · 1.5 g	Yes (shell)
B01YG37	5 mV/g	±1,000 g	5 – 8k Hz	6.4 × 6.4 × 6.7 mm · 1.1 g	Yes (pad)
B02YG37	10 mV/g	±500 g	5 – 8k Hz	6.4 × 6.4 × 6.7 mm · 1.1 g	Yes (pad)

Downloads & next steps

Datasheet, installation guide, and a quote from our global support team.

B02Y36 datasheet (PDF)Request a quote

Also available: Accelerometer operation & installation guide (PDF)

Sensitivity (mV/g)	10
Range (g)	500
Broadband Resolution (g rms)	0.001
Linearity	1%
Frequency Range [5%] (Hz)	5-8k
Min Frequency [5%] (Hz)	5
Max Frequency [5%] (Hz)	8000
Frequency Range [10%] (Hz)	2-10k
Resonant Frequency (kHz)	≥50
Discharge Time Constant (s)	≤1
Transverse Sensitivity	≤5%
Excitation Voltage (Vdc)	20-30 Vdc
Constant Current Excitation (mA)	2-20 mA
Output Impedance (Ω)	≤100
Output Bias Voltage (V)	8-12 Vdc
Max Acceleration (g)	1500
Max Shock (g)	2000
Temperature Range (℃)	-50~100
Min Temperature (℃)	-50
Max Temperature (℃)	100
Sensitivity Temperature Coefficient (%/℃)	-0.13
Sealing	Laser Welding IP68
Housing Material	Titanium Alloy
Output Connector	Connected Cable
Mounting	Adhesive
Weight (grams)	1
Sensor Type	Miniature
Output Type	IEPE
Axis	Triaxial
TEDS Optional	No

Datasheet (PDF): B02Y36
Manual (PDF): Op. & Installation Guide
Popular Cables: K00BB05, K00BB72

B02Y36

Overview