B01YG36
Base-Isolated Shell Miniature IEPE Accelerometer
Triaxial
Sensitivity: 5mV/g
Range: ±1000g
Frequency (5%): 5-8k Hz
Temp Range: -50~100°C
Connector: Integral Cable
Mount: Adhesive
- Fast Lead Time
Overview
The B01YG36 is a base-isolated micro-miniature triaxial IEPE accelerometer built on a piezoelectric ceramic shear structure with a custom ASIC signal conditioning circuit. With 5 mV/g sensitivity and a ±1,000 g range it is the higher-range model of the pair, built for drop, shock and high-level vibration testing on very small or light test articles. Typical uses include drop and package testing, environmental stress screening, powertrain NVH and shock on small components.
The laser-welded low-density titanium-alloy housing measures just 7.8 × 7.8 × 7.1 mm and weighs 1.5 g, and an integrated insulated mounting shell isolates the signal ground from the test structure (≥ 10⁸ Ω) to prevent ground loops. An integral high-temperature cable and adhesive base mount make it easy to install where a threaded stud is impractical, and it delivers simultaneous X, Y and Z data from a single mounting point.
Why engineers choose the B01YG36
Ultra-low mass
At 1.5 g and 7.8 × 7.8 × 7.1 mm, the B01YG36 adds almost no mass loading, so lightweight structures, small components and PCBs behave as they would unloaded, and it fits where nothing else will.
Custom ASIC electronics
A highly integrated ASIC gives a low-impedance IEPE output with 2–20 mA constant-current excitation. Spectral noise of 80 µg/√Hz at 100 Hz and 0.002 g rms broadband resolution.
Base isolated
The integrated insulated mounting shell gives ≥ 10⁸ Ω isolation between signal ground and the mounting surface, so multi-channel tests on conductive structures stay free of ground loops. Laser-welded titanium, IP68, rated to 2,000 g rms and 3,000 g pk.
Typical applications
-
Drop testing and package testing -
Powertrain NVH measurements -
Vibration tests on space-constrained or lightweight components -
Testing of small components and PCBs -
Environmental stress screening (ESS) -
General triaxial vibration measurement where mass loading matters
What’s in the box
-
B01YG36 triaxial accelerometer with integral K00BB05-1M high-temperature cable (1 m) -
Product calibration certificate
Options & accessories
-
Integral high-temperature cable – supplied as K00BB05-1M (1 m, BB type) by default; other lengths and terminations available – use the Cable Builder or contact us
-
Adhesive mounting – see the installation guide for recommended adhesives and surface preparation
Key specifications
Other models in the Y36 family
Same ultra-miniature titanium housing, custom ASIC and integral high-temperature cable across the family. Choose the sensitivity, range and base isolation that fit your test.
| Model | Sensitivity | Range | Frequency (±5%) | Size · weight | Base isolated |
|---|---|---|---|---|---|
| B01Y36 | 5 mV/g | ±1,000 g | 5 – 10k Hz | 6.4 mm cube · 1 g | None |
| B02Y36 | 10 mV/g | ±500 g | 5 – 8k Hz | 6.4 mm cube · 1 g | None |
| B01YG36This model | 5 mV/g | ±1,000 g | 5 – 8k Hz | 7.8 × 7.8 × 7.1 mm · 1.5 g | Yes (shell) |
| B02YG36 | 10 mV/g | ±500 g | 5 – 6k Hz | 7.8 × 7.8 × 7.1 mm · 1.5 g | Yes (shell) |
| B01YG37 | 5 mV/g | ±1,000 g | 5 – 8k Hz | 6.4 × 6.4 × 6.7 mm · 1.1 g | Yes (pad) |
| B02YG37 | 10 mV/g | ±500 g | 5 – 8k Hz | 6.4 × 6.4 × 6.7 mm · 1.1 g | Yes (pad) |
| Sensitivity (mV/g) | 5 |
|---|---|
| Range (g) | 1000 |
| Broadband Resolution (g rms) | 0.002 |
| Linearity | 1% |
| Frequency Range [5%] (Hz) | 5-8k |
| Min Frequency [5%] (Hz) | 5 |
| Max Frequency [5%] (Hz) | 8000 |
| Frequency Range [10%] (Hz) | 2-10k |
| Resonant Frequency (kHz) | ≥20 |
| Discharge Time Constant (s) | ≤1 |
| Transverse Sensitivity | ≤5% |
| Excitation Voltage (Vdc) | 20-30 Vdc |
| Constant Current Excitation (mA) | 2-20 mA |
| Output Impedance (Ω) | ≤100 |
| Output Bias Voltage (V) | 8-12 Vdc |
| Max Acceleration (g) | 2000 |
| Max Shock (g) | 3000 |
| Temperature Range (℃) | -50~100 |
| Min Temperature (°C) | -50 |
| Max Temperature (°C) | 100 |
| Sensitivity Temperature Coefficient (%/℃) | -0.13 |
| Sealing | Laser Welding IP68 |
| Housing Material | Titanium Alloy |
| Output Connector | Connected Cable |
| Mounting | Adhesive |
| Weight (grams) | 1.5 |
| Sensor Type | Miniature |
| Output Type | IEPE |
| Axis | Triaxial |
| TEDS Optional | No |
- Datasheet (PDF) B01YG36
- Manual (PDF) Op. & Installation Guide
- Selection Guide (PDF) Accelerometer Selection Guide
- Popular Cables K00BB05, K00BB72





