C06B01
General Purpose

C06B01

General Purpose Charge Accelerometer
Uniaxial
Sensitivity: 100pC/g
Range: ±500g
Frequency (5%): 0.5-5k Hz
Temp Range: -40~160°C
Connector: Side
Mount: 10-32/M5 Female

  • Check Mark Fast Lead Time
Datasheet (PDF): C06B01
SKU: C06B01 Categories: , ,
Charge-Mode (PE) General-Purpose Uniaxial Accelerometer · Side connector · +160 °C

Overview

The C06B01 is a charge-mode (PE) uniaxial accelerometer built on a piezoelectric ceramic shear structure with a wide-bandwidth frequency response and a low sensitivity temperature response. With 100 pC/g charge sensitivity and a ±500 g range it is the widest-range member of the family, with 100 pC/g, a ±500 g range and 5 kHz bandwidth for general-purpose charge-mode vibration work at high temperature. Typical uses include modal analysis, vibration control and shaker testing, engine and exhaust vibration and general monitoring where a charge amplifier is already in the chain.

With no built-in electronics, the sensor works from −40 °C to +160 °C and pairs with any charge amplifier, which sets the low-frequency limit of the system. High-quality ceramics ensure long-term stability. The laser-welded HEX 16.1 × 19.1 mm stainless-steel housing is sealed to IP68 with a low-profile side M5 connector and an M5 stud thread on the base, with 10-32 connector and thread versions available.

100 pC/g
Charge sensitivity
±500 g
Measurement range
0.5 – 5k Hz
Frequency range (±5%)
−40 to +160 °C
Operating temperature
27 g
Weight
HEX 16.1 × 19.1 mm
Stainless steel, IP68

Why engineers choose the C06B01

Charge mode, +160 °C

No internal electronics means nothing to overheat: the C06B01 runs continuously at +160 °C and pairs with any charge amplifier or charge-input DAQ, with 2,400 pF capacitance and ≥ 10¹¹ Ω insulation resistance for a clean, stable charge signal.

Shear-mode piezoceramic

Shear structure with low base-strain and temperature sensitivity gives a ±5% response from 0.5 Hz to 5 kHz (±10% over 0.3 – 6k Hz) with resonance ≥ 22 kHz, 1% non-linearity and ≤ 5% transverse sensitivity.

Rugged stainless housing

Laser-welded HEX 16.1 × 19.1 mm stainless-steel housing sealed to IP68, weighing 27 g and rated to 800 g rms vibration and 1,500 g pk shock. Side connector with M5 or 10-32 options and an M5 × 3.7 stud mount at 3.0 N·m.

Typical applications

  • Modal analysis
  • Vibration control and shaker testing
  • General vibration monitoring
  • High-temperature vibration measurement to +160 °C
  • Engine, exhaust and hot-machinery testing
  • Low-clearance installations where a side cable exit helps

What’s in the box

  • C06B01 charge-mode accelerometer
  • Product calibration certificate
  • Mounting screw

Options & accessories

  • Optional versions: C06B01-A with 10-32 output connector, C06B01-E with 10-32 mounting thread
  • Recommended low-noise charge cables K14AB14 / K01AB01 – build yours in the Cable Builder
  • Recommended mounting bases H02B03 / H02B25
  • Charge amplifiers and charge-input signal conditioners – contact us
Charge sensitivity
100 pC/g (10 pC/(m/s²))
Measurement range
±500 g
Frequency range
0.5 – 5k Hz (±5%) · 0.3 – 6k Hz (±10%)
Resonance frequency
≥ 22 kHz
Non-linearity
1%
Transverse sensitivity
≤ 5%
Capacitance
2,400 pF
Insulation resistance
≥ 10¹¹ Ω
Vibration / shock limit
800 g rms · 1,500 g pk
Operating temperature
−40 to +160 °C
Connector / mounting
M5 side (10-32 opt.) · M5 × 3.7 (10-32 opt.) thread
Size / weight / torque
HEX 16.1 × 19.1 mm · 27 g · 3.0 N·m
Sensitivity measured at 160 Hz, 24 VDC, 4 mA. Typical values. Vibration and shock limits per JBT 6822-2018 7.12.1 and refer to the sensor surviving in a non-powered state.

Other models in the CXXA/B01 charge-mode family

Same shear-mode piezoceramic, charge output, +160 °C rating and stainless-steel housing across the family. A models have a top connector, B models a side connector. Choose the sensitivity, range and connector that fit your test and charge amplifier.

Model Sensitivity Range Frequency (±5%) Connector Size · weight
C06A01 100 pC/g ±500 g 0.5 – 5k Hz Top HEX 16.1 × 26.1 mm · 27 g
C08A01 300 pC/g ±200 g 0.5 – 3k Hz Top HEX 19.1 × 34.3 mm · 54.5 g
C10A00 1,000 pC/g ±50 g 0.5 – 1.5k Hz Top HEX 26.1 × 30.5 mm · 133 g
C06B01This model 100 pC/g ±500 g 0.5 – 5k Hz Side HEX 16.1 × 19.1 mm · 27 g
C08B01 300 pC/g ±200 g 0.5 – 3k Hz Side HEX 19.1 × 27.6 mm · 54 g
C10B00 1,000 pC/g ±50 g 0.5 – 1.5k Hz Side HEX 26.1 × 24.8 mm · 137 g
Downloads & next steps
Datasheet, installation guide, and a quote from our global support team.
Sensitivity (pC/g)

100
Range (g)

500
Linearity

1%
Min Frequency [5%] (Hz)

0.5
Max Frequency [5%] (Hz)

5000
Resonant Frequency (kHz)

≥22
Transverse Sensitivity

≤5%
Capacitance (pF)

2400
Acceleration Limit (g)

800
Max Shock (g)

1500
Temperature Range (℃)

-40~160
Min Temperature (℃)

-40
Max Temperature (℃)

160
Sensitivity Temperature Coefficient (%/℃)

0.08
Sealing

Laser Welding IP68
Housing Material

Stainless Steel
Output Connector

10-32 (Side), M5 (Side)
Mounting

10-32 Female, M5 Female
Weight (grams)

27
Axis

Uniaxial
Output Type

Charge

Related products

  • B07B01 High-Sensitivity IEPE Accelerometer

    B07B01

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 200mV/g
    Range: ±25g
    Frequency (5%): 1-6k Hz
    Temp Range: -40~120°C
    Connector: Side
    Mount: 10-32/M5 Female

  • B07A01

    B07A01

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 200mV/g
    Range: ±25g
    Frequency (5%): 1-6k Hz
    Temp Range: -40~120°C
    Connector: Top
    Mount: 10-32/M5 Female

  • B06Y31 Triaxial Cube IEPE Accelerometer

    B06Y31

    Triaxial Cube IEPE Accelerometer
    Sensitivity: 100mV/g
    Range: ±50g
    Frequency (5%): 1-7k Hz
    Temp Range: -40~120°C
    Connector: 1/4-28 4pin
    Mount: M2.5 Female/Adhesive

  • B05B00 General Purpose IEPE Accelerometer - 100g

    B05B00

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 50mV/g
    Range: ±100g
    Frequency (5%): 1-8k Hz
    Temp Range: -40~120°C
    Connector: Side
    Mount: 10-32/M5 Female