B00A07

The B00A07 is a miniature uniaxial IEPE shock accelerometer built on a unique piezoelectric ceramic shear structure with reduced base strain and transverse sensitivity, a wide-band frequency response and a resonance above 50 kHz. With 2 mV/g sensitivity and a ±2,500 g range it is a mid-range model in the family, balancing shock range and resolution for general drop and impact work. Typical uses include drop testing, crash and impact testing, package and product qualification and blast testing at lower levels.

High-quality ceramics ensure long-term stability and the built-in low-impedance circuit keeps noise low. The HEX 11 × 20.7 mm high-strength stainless-steel housing is laser welded to IP68, weighs just 8 g, and carries an industry-standard M5 top connector and an M5 mounting thread at the base, with 10-32 connector and thread versions available.

Built for shock

Shear-mode ceramics with a resonance ≥ 50 kHz and a ≤ 0.5 s discharge time constant capture fast transients cleanly, rated to 7,000 g pk shock. Reduced base strain and ≤ 5% transverse sensitivity keep the signal honest under severe impacts. Non-linearity 1%.

Built-in IEPE electronics

Low-impedance circuit with 2–20 mA constant-current excitation and 8–12 V bias, spectral noise of 200 µg/√Hz at 100 Hz and 0.005 g rms broadband resolution. Drives long cables straight into any IEPE-compatible DAQ.

Rugged stainless housing

Laser-welded HEX 11 × 20.7 mm high-strength stainless-steel housing sealed to IP68, weighing 8 g and rated to 3,500 g rms continuous vibration. Top connector with M5 or 10-32 options.

Key specifications