B01B01
IEPE

B01B01

Miniature IEPE Accelerometer
Uniaxial
Sensitivity: 5mV/g
Range: ±1000g
Frequency (5%): 1-10k Hz
Temp Range: -40~120°C
Connector: Side (M3)
Mount: M3 Female

  • Check Mark Fast Lead Time
Datasheet (PDF): B01B01
SKU: B01B01 Categories: , , ,
Miniature IEPE Accelerometer · Side connector · TEDS optional

Overview

The B01B01 is a miniature uniaxial IEPE accelerometer built on a piezoelectric ceramic shear structure with a broadband response to 10 kHz. With 5 mV/g sensitivity and a ±1,000 g range it is the highest-range model in the family, built for high-level vibration and shock testing on small, light test articles. Typical uses include shock and drop testing, HALT/HASS screening, small-component durability and high-level machinery vibration.

Integrated microminiature circuits give a low-impedance, low-noise output with a good sensitivity temperature response, and a memory-alloy fastener keeps the shear element stable and reliable. The HEX 10.1 × 12.6 mm stainless-steel or titanium-alloy housing is laser welded to IP68 for high sealing grade and strength, with a low-profile side connector and an M3 mounting thread at the base.

5 mV/g
Sensitivity (±10%)
±1,000 g
Measurement range
1 – 10 kHz
Frequency range (±5%)
−40 to +120 °C
Operating temperature
4.5 g / 4 g
Weight (stainless / titanium)
HEX 10.1 × 12.6 mm
Laser welded, IP68

Why engineers choose the B01B01

Small and light

A HEX 10.1 × 12.6 mm package weighing 4.5 g (SS) / 4 g (Ti) fits small test articles and tight spaces with minimal mass loading, so the structure you measure behaves as it would unloaded.

Microminiature IEPE circuit

Integrated low-impedance circuit with 2–20 mA constant-current excitation. Spectral noise of 80 µg/√Hz at 100 Hz, 0.002 g rms broadband resolution and −0.1 %/°C sensitivity temperature response.

Laser-welded housing

Laser-welded stainless-steel or titanium-alloy housing sealed to IP68 with a memory-alloy fastener and shear structure, rated to 4,000 g rms vibration and 8,000 g pk shock.

Typical applications

  • Modal analysis
  • Vibration control and shaker testing
  • Universal vibration monitoring
  • PCB, electronics and small-component testing
  • Low-clearance installations where a side cable exit helps
  • General-purpose uniaxial vibration measurement

What’s in the box

  • B01B01 miniature accelerometer
  • Product calibration certificate
  • Install screws

Options & accessories

  • TEDS (IEEE 1451.4) for plug-and-play sensor ID – order model 20101B
  • Available in stainless-steel or titanium-alloy housing (4.5 g (SS) / 4 g (Ti)) – specify when ordering
  • Optional versions: B01B01-A with 10-32 output connector, B01B01-E with 10-32 mounting thread
  • Cable assemblies to suit the M3 connector – build yours in the Cable Builder
Sensitivity (±10%)
5 mV/g (0.5 mV/(m/s²))
Measurement range
±1,000 g
Broadband resolution
0.002 g rms
Frequency range
1 – 10 kHz (±5%) · 0.5 – 12 kHz (±10%)
Resonance frequency
≥ 90 kHz
Transverse sensitivity
≤ 5%
Excitation
20 – 30 VDC, 2 – 20 mA
Output bias voltage
8 – 12 V
Spectral noise (10 / 100 / 1000 Hz)
300 / 80 / 40 µg/√Hz
Vibration / shock limit
4,000 g rms · 8,000 g pk
Connector / mounting
M3 side · M3 thread
Size / weight
HEX 10.1 × 12.6 mm · 4.5 g (SS) / 4 g (Ti)
Sensitivity measured at 160 Hz, 24 VDC, 4 mA. Typical values. Vibration and shock limits per JBT 6822-2018 7.12.1 and refer to the sensor surviving in a non-powered state.

Other models in the BXXBXX family

Same 1 – 10 kHz bandwidth and miniature laser-welded housing across the family. Choose the sensitivity and range that fit your test levels.

Model Sensitivity Range Size Noise @ 100 Hz
B01B01This model 5 mV/g ±1,000 g HEX 10.1 × 12.6 mm 80 µg/√Hz
B02B01 10 mV/g ±500 g HEX 10.1 × 12.6 mm 40 µg/√Hz
B03B03 20 mV/g ±250 g HEX 10.1 × 12.6 mm 20 µg/√Hz
B05B06 50 mV/g ±100 g HEX 10.1 × 12.6 mm 8 µg/√Hz
B06B14 100 mV/g ±50 g HEX 11.1 × 14.6 mm 4 µg/√Hz
Downloads & next steps
Datasheet, installation guide, and a quote from our global support team.
Sensitivity (mV/g)

5
Range (g)

1000
Broadband Resolution (g rms)

0.002
Linearity

1%
Frequency Range [5%] (Hz)

1-10k
Min Frequency [5%] (Hz)

1
Max Frequency [5%] (Hz)

10000
Frequency Range [10%] (Hz)

0.5-12k
Resonant Frequency (kHz)

≥90
Discharge Time Constant (s)

≤1
Transverse Sensitivity

≤5%
Excitation Voltage (Vdc)

20-30 Vdc
Constant Current Excitation (mA)

2-20 mA
Output Impedance (Ω)

≤100
Output Bias Voltage (V)

8-12 Vdc
Max Acceleration (g)

4000
Max Shock (g)

8000
Temperature Range (℃)

-40~120
Min Temperature (℃)

-40
Max Temperature (℃)

120
Sensitivity Temperature Coefficient (%/℃)

-0.1
Sealing

Laser Welding IP68
Housing Material

Stainless Steel/Titanium Alloy
Output Connector

M3 (Side)
Mounting

M3 Female
Weight (grams)

4
Sensor Type

Miniature
Output Type

IEPE
Axis

Uniaxial
TEDS Optional

Yes

Related products

  • B02B00 General Purpose IEPE Accelerometer - 500g

    B02B00

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 10mV/g
    Range: ±500g
    Frequency (5%): 2-10k Hz
    Temp Range: -40~120°C
    Connector: Side
    Mount: 10-32/M5 Female

  • B08B01 High-Sensitivity IEPE Accelerometer

    B08B01

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 300mV/g
    Range: ±15g
    Frequency (5%): 1-4k Hz
    Temp Range: -40~120°C
    Connector: Side
    Mount: 10-32/M5 Female

  • B07A01

    B07A01

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 200mV/g
    Range: ±25g
    Frequency (5%): 1-6k Hz
    Temp Range: -40~120°C
    Connector: Top
    Mount: 10-32/M5 Female

  • B03B00

    B03B00

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 20mV/g
    Range: ±250g
    Frequency (5%): 1-10k Hz
    Temp Range: -40~120°C
    Connector: Side
    Mount: 10-32/M5 Female