B06A94

The B06A94 is a high-temperature uniaxial IEPE accelerometer built on a piezoelectric ceramic shear structure with an internal high-temperature, low-impedance circuit rated to +160 °C. With 100 mV/g sensitivity and a ±50 g range it is the most sensitive model in the family, with the lowest noise floor for very low-level vibration at elevated temperatures. Typical uses include condition monitoring on hot machinery, structural and modal work in heated test cells, and precision environmental testing.

High-quality piezoelectric material gives low temperature drift and a low thermal transient response, with wide bandwidth and low transverse sensitivity. The HEX 13.1 × 25 mm laser-welded stainless-steel housing provides exceptional sealing (IP68) and strength, with a top connector and an M5 mounting thread on the base, and 10-32 connector and thread versions available.

Rated to +160 °C

A built-in high-temperature circuit and low-drift piezoelectric material keep the output stable from −50 °C right up to +160 °C, with a low thermal transient response, so readings stay clean through thermal cycling and on hot surfaces.

Built-in IEPE electronics

Integrated microminiature low-impedance circuit with 2–20 mA constant-current excitation and 8–14 V bias. Spectral noise of 2.4 µg/√Hz at 100 Hz drives long cables into any IEPE-compatible DAQ without extra conditioning.

Rugged stainless housing

Laser-welded HEX 13.1 × 25 mm stainless-steel housing sealed to IP68, weighing 17 g and rated to 400 g rms vibration and 1,000 g pk shock. Top connector with M5 or 10-32 options.

Key specifications