B06BM6

Miniature IEPE Accelerometer
Uniaxial
Sensitivity: 100mV/g
Range: ±50g
Frequency (5%): 1-10k Hz
Temp Range: -50~120°C
Connector: Side
Mount: Adhesive

Fast Lead Time

Datasheet (PDF): B06BM6

SKU: B06BM6 Categories: Accelerometers, IEPE, Miniature

IEPE Miniature Uniaxial Accelerometer · Side connector · Adhesive mount · TEDS optional

Overview

The B06BM6 is a miniature uniaxial IEPE accelerometer with a built-in miniature impedance converter that conditions the piezoelectric charge signal to a low-impedance voltage output. With 100 mV/g sensitivity and a ±50 g range it is the most sensitive model in the family, with the lowest noise floor for very low-level vibration on light structures. Typical uses include modal surveys on light structures, precision electronics testing, ESS and low-level measurements in confined spaces.

A highly integrated miniature ASIC gives excellent long-term output stability and repeatability, and the laser-welded titanium-alloy housing keeps the whole sensor to 14.4 × 6.6 × 8.5 mm and 2.7 g for minimal mass loading on the test structure. The adhesive base mount and low-profile side connector make it easy to install where space is tight.

100 mV/g

Sensitivity

±50 g

Measurement range

1 – 10k Hz

Frequency range (±5%)

−50 to +120 °C

Operating temperature

2.7 g

Weight

14.4 × 6.6 × 8.5 mm

Titanium alloy, IP68

Why engineers choose the B06BM6

Minimal mass loading

At 2.7 g and 14.4 × 6.6 × 8.5 mm, the B06BM6 barely changes the response of PCBs, small components and light structures, so what you measure is the structure, not the sensor.

Miniature ASIC electronics

Built-in impedance converter with 2–20 mA constant-current excitation delivers a low-impedance IEPE output with spectral noise of 4 µg/√Hz at 100 Hz, 0.0001 g rms broadband resolution and excellent long-term stability and repeatability.

Laser-welded titanium housing

Laser-welded titanium-alloy housing sealed to IP68, rated to 400 g rms vibration and 1,000 g pk shock, with bandwidth to 10 kHz and resonance ≥ 38 kHz. Adhesive mount with side connector, M5 or 10-32.

Typical applications

PCB and electronics vibration testing
Environmental stress screening (ESS)
Low-clearance installations where a side cable exit helps
Small-component and product qualification
Lightweight structures sensitive to mass loading
General-purpose uniaxial vibration measurement

What’s in the box

B06BM6 miniature accelerometer
Product calibration certificate

Options & accessories

TEDS (IEEE 1451.4) for plug-and-play sensor ID – order model 20616B (TEDS version: 8.5 × 8.5 × 8.2 mm, 3.1 g, −40 to +85 °C)
Optional version: B06BM6-A with 10-32 output connector
Recommended cables K14AB02 (10-32) / K01AB02 (M5) – build yours in the Cable Builder
Recommended mounting base H03C07
Adhesive mounting – see the installation guide for recommended adhesives and surface preparation

Key specifications

Full specifications in the datasheet (PDF) →

Sensitivity

100 mV/g (10 mV/(m/s²))

Measurement range

±50 g

Frequency range

1 – 10k Hz (±5%) · 0.5 – 12k Hz (±10%)

Broadband resolution

0.0001 g rms

Resonance frequency

≥ 38 kHz

Transverse sensitivity

≤ 5%

Excitation

20 – 30 VDC, 2 – 20 mA

Output bias voltage

8 – 12 V

Spectral noise (10 / 100 / 1000 Hz)

15 / 4 / 2 µg/√Hz

Vibration / shock limit

400 g rms · 1,000 g pk

Connector / mounting

M5 side (10-32 opt.) · adhesive

Size / weight

14.4 × 6.6 × 8.5 mm · 2.7 g

Sensitivity measured at 160 Hz, 24 VDC, 4 mA. Typical values. Vibration and shock limits per JBT 6822-2018 7.12.1 and refer to the sensor surviving in a non-powered state.

Other models in the BXXA/BM6 family

Same miniature ASIC electronics, titanium housing and adhesive mount across the family. AM6 models have a top connector, BM6 models a side connector. Choose the sensitivity and range that fit your test levels.

Model	Sensitivity	Range	Frequency (±5%)	Connector	Size · weight
B02AM6	10 mV/g	±500 g	1 – 10k Hz	Top	HEX 8.6 × 12.2 mm · 2 g
B03AM6	20 mV/g	±250 g	1 – 12k Hz	Top	HEX 8.6 × 12.2 mm · 2 g
B05AM6	50 mV/g	±100 g	1 – 12k Hz	Top	HEX 8.6 × 12.2 mm · 2.1 g
B06AM6	100 mV/g	±50 g	1 – 10k Hz	Top	HEX 8.6 × 12.2 mm · 2.5 g
B02BM6	10 mV/g	±500 g	1 – 10k Hz	Side	13.6 × 6.6 × 7.7 mm · 2 g
B03BM6	20 mV/g	±250 g	1 – 10k Hz	Side	13.6 × 6.6 × 7.7 mm · 2 g
B05BM6	50 mV/g	±100 g	1 – 12k Hz	Side	13.6 × 6.6 × 7.7 mm · 2.1 g
B06BM6This model	100 mV/g	±50 g	1 – 10k Hz	Side	14.4 × 6.6 × 8.5 mm · 2.7 g

Downloads & next steps

Datasheet, installation guide, and a quote from our global support team.

B06BM6 datasheet (PDF)
Request a quote

Also available: Accelerometer operation & installation guide (PDF)

Sensitivity (mV/g)	100
Range (g)	50
Broadband Resolution (g rms)	0.0001
Linearity	1%
Frequency Range [5%] (Hz)	1-10k
Min Frequency [5%] (Hz)	1
Max Frequency [5%] (Hz)	10000
Frequency Range [10%] (Hz)	0.5-12k
Resonant Frequency (kHz)	≥38
Discharge Time Constant (s)	≤1
Transverse Sensitivity	≤5%
Excitation Voltage (Vdc)	20-30 Vdc
Constant Current Excitation (mA)	2-20 mA
Output Impedance (Ω)	≤100
Output Bias Voltage (V)	8-12 Vdc
Max Acceleration (g)	400
Max Shock (g)	1000
Temperature Range (℃)	-50~120
Min Temperature (°C)	-50
Max Temperature (°C)	120
Sensitivity Temperature Coefficient (%/℃)	-0.07
Sealing	Laser Welding IP68
Housing Material	Titanium Alloy
Output Connector	10-32 (Side), M5 (Side)
Mounting	Adhesive
Weight (grams)	2.7
Sensor Type	Miniature
Output Type	IEPE
Axis	Uniaxial
TEDS Optional	No

Datasheet (PDF) B06BM6
Manual (PDF) Op. & Installation Guide
Selection Guide (PDF) Accelerometer Selection Guide
Popular Cables K14AB02 (10-32), K01AB02 (M5)
Popular Mounting Bases H03C07
TEDS Model 20616B

B06BM6

Overview