B06A14
IEPE

B06A14

Miniature IEPE Accelerometer
Uniaxial
Sensitivity: 100mV/g
Range: ±50g
Frequency (5%): 1-10k Hz
Temp Range: -40~120°C
Connector: Top
Mount: 10-32/M5 Female

  • Check Mark Fast Lead Time
Datasheet (PDF): B06A14
SKU: B06A14 Categories: , , ,
Miniature IEPE Accelerometer · Top connector · TEDS optional

Overview

The B06A14 is a miniature uniaxial IEPE accelerometer built on a piezoelectric ceramic shear structure with a broadband response to 10 kHz. With 100 mV/g sensitivity and a ±50 g range it is the most sensitive model in the family, with the lowest noise floor for very low-level vibration on light structures. Typical uses include modal surveys on light structures, precision R&D work, vibration control and low-level monitoring.

Integrated microminiature circuits give a low-impedance, low-noise output with a good sensitivity temperature response, and a memory-alloy fastener keeps the shear element stable and reliable. The HEX 11.0 × 20.7 mm titanium-alloy housing is laser welded to IP68 for high sealing grade and strength, with a top connector and an M5 mounting thread at the base.

100 mV/g
Sensitivity
±50 g
Measurement range
1 – 10 kHz
Frequency range (±5%)
−40 to +120 °C
Operating temperature
5.3 g
Weight
HEX 11.0 × 20.7 mm
Laser welded, IP68

Why engineers choose the B06A14

Small and light

A HEX 11.0 × 20.7 mm package weighing 5.3 g fits small test articles and tight spaces with minimal mass loading, so the structure you measure behaves as it would unloaded.

Microminiature IEPE circuit

Integrated low-impedance circuit with 2–20 mA constant-current excitation. Spectral noise of 4 µg/√Hz at 100 Hz, 0.0001 g rms broadband resolution and −0.1 %/°C sensitivity temperature response.

Laser-welded housing

Laser-welded titanium-alloy housing sealed to IP68 with a memory-alloy fastener and shear structure, rated to 400 g rms vibration and 1,000 g pk shock.

Typical applications

  • Modal analysis
  • Vibration control and shaker testing
  • Universal vibration monitoring
  • PCB, electronics and small-component testing
  • Lightweight structures sensitive to mass loading
  • General-purpose uniaxial vibration measurement

What’s in the box

  • B06A14 miniature accelerometer
  • Product calibration certificate
  • Install screws

Options & accessories

  • TEDS (IEEE 1451.4) for plug-and-play sensor ID – order model 20614A
  • Titanium-alloy housing as standard
  • Optional versions: B06A14-A with 10-32 output connector, B06A14-E with 10-32 mounting thread
  • Cable assemblies to suit the M5 connector – build yours in the Cable Builder
Sensitivity
100 mV/g (10 mV/(m/s²))
Measurement range
±50 g
Broadband resolution
0.0001 g rms
Frequency range
1 – 10 kHz (±5%) · 0.5 – 12 kHz (±10%)
Resonance frequency
≥ 37 kHz
Transverse sensitivity
≤ 5%
Excitation
20 – 30 VDC, 2 – 20 mA
Output bias voltage
8 – 12 V
Spectral noise (10 / 100 / 1000 Hz)
15 / 4 / 2 µg/√Hz
Vibration / shock limit
400 g rms · 1,000 g pk
Connector / mounting
M5 top (10-32 opt.) · M5 (10-32 opt.) thread
Size / weight
HEX 11.0 × 20.7 mm · 5.3 g
Sensitivity measured at 160 Hz, 24 VDC, 4 mA. Typical values. Vibration and shock limits per JBT 6822-2018 7.12.1 and refer to the sensor surviving in a non-powered state.

Other models in the BXXAXX family

Same 1 – 10 kHz bandwidth and miniature laser-welded housing across the family. Choose the sensitivity and range that fit your test levels.

Model Sensitivity Range Size Noise @ 100 Hz
B01A01 5 mV/g ±1,000 g HEX 10.1 × 18.8 mm 80 µg/√Hz
B02A01 10 mV/g ±500 g HEX 10.1 × 18.8 mm 40 µg/√Hz
B03A02 20 mV/g ±250 g HEX 10.1 × 18.8 mm 20 µg/√Hz
B05A06 50 mV/g ±100 g HEX 10.1 × 18.8 mm 8 µg/√Hz
B06A14This model 100 mV/g ±50 g HEX 11.0 × 20.7 mm 4 µg/√Hz
Downloads & next steps
Datasheet, installation guide, and a quote from our global support team.
Sensitivity (mV/g)

100
Range (g)

50
Broadband Resolution (g rms)

0.0001
Linearity

1%
Frequency Range [5%] (Hz)

1-10k
Min Frequency [5%] (Hz)

1
Max Frequency [5%] (Hz)

10000
Frequency Range [10%] (Hz)

0.5-12k
Resonant Frequency (kHz)

≥37
Discharge Time Constant (s)

≤1
Transverse Sensitivity

≤5%
Excitation Voltage (Vdc)

20-30 Vdc
Constant Current Excitation (mA)

2-20 mA
Output Impedance (Ω)

≤100
Output Bias Voltage (V)

8-12 Vdc
Max Acceleration (g)

400
Max Shock (g)

1000
Temperature Range (℃)

-40~120
Min Temperature (℃)

-40
Max Temperature (℃)

120
Sensitivity Temperature Coefficient (%/℃)

-0.1
Sealing

Laser Welding IP68
Housing Material

Titanium Alloy
Output Connector

10-32 (Top), M5 (Top)
Mounting

10-32 Female, M5 Female
Weight (grams)

5.3
Sensor Type

Miniature
Output Type

IEPE
Axis

Uniaxial
TEDS Optional

Yes

Related products

  • B06Y31 Triaxial Cube IEPE Accelerometer

    B06Y31

    Triaxial Cube IEPE Accelerometer
    Sensitivity: 100mV/g
    Range: ±50g
    Frequency (5%): 1-7k Hz
    Temp Range: -40~120°C
    Connector: 1/4-28 4pin
    Mount: M2.5 Female/Adhesive

  • B03B00

    B03B00

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 20mV/g
    Range: ±250g
    Frequency (5%): 1-10k Hz
    Temp Range: -40~120°C
    Connector: Side
    Mount: 10-32/M5 Female

  • B07B01 High-Sensitivity IEPE Accelerometer

    B07B01

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 200mV/g
    Range: ±25g
    Frequency (5%): 1-6k Hz
    Temp Range: -40~120°C
    Connector: Side
    Mount: 10-32/M5 Female

  • B02A00

    B02A00

    General Purpose IEPE Accelerometer
    Uniaxial
    Sensitivity: 10mV/g
    Range: ±500g
    Frequency (5%): 2-10k Hz
    Temp Range: -40~120°C
    Connector: Top
    Mount: 10-32/M5 Female