B00AG2

The B00AG2 is a ground-isolated uniaxial IEPE shock accelerometer built on a unique piezoelectric ceramic shear structure with reduced base strain and transverse sensitivity and a resonance above 60 kHz. With 2 mV/g sensitivity and a ±2,500 g range it is the most sensitive model in the family, with the lowest noise floor for moderate shock and high-level vibration. Typical uses include drop and package testing, crash and impact testing, HALT/HASS and high-level vibration on small assemblies.

High-quality ceramics ensure long-term stability, and a unique double-shielded construction isolates the signal ground from the test structure (≥ 10⁸ Ω) so multi-channel shock tests on conductive fixtures stay free of ground loops. The laser-welded titanium-alloy HEX 11 × 24.9 mm housing weighs 7.7 g and mounts on an integrated one-piece male screw, configurable as M5, M6 or 10-32, for a secure, repeatable installation, with a top M5 connector and a 10-32 connector version available.

Built for extreme shock

Shear-mode ceramics with a resonance ≥ 60 kHz and a ≤ 0.5 s discharge time constant capture fast transients cleanly, rated to 8,000 g pk. Reduced base strain and ≤ 5% transverse sensitivity keep the signal honest under severe impacts. Non-linearity 1%.

Ground isolated

Double-shielded construction gives ≥ 10⁸ Ω isolation between signal ground and the mounting surface, so shock tables, drop fixtures and blast rigs with many channels stay free of ground loops and electrical noise.

Integrated screw, IEPE output

One-piece integrated male mounting screw, configurable as M5, M6 or 10-32, for strength and reliability. Built-in low-impedance circuit with 2–20 mA excitation and 8–12 V bias, spectral noise of 200 µg/√Hz at 100 Hz and 0.005 g rms broadband resolution.

Key specifications