B02AM6

The B02AM6 is a miniature uniaxial IEPE accelerometer with a built-in miniature impedance converter that conditions the piezoelectric charge signal to a low-impedance voltage output. With 10 mV/g sensitivity and a ±500 g range it is the highest-range model in the family, built for high-level vibration and moderate shock on small, light test articles. Typical uses include PCB and electronics vibration testing, environmental stress screening, drop and durability testing on small components.

A highly integrated miniature ASIC gives excellent long-term output stability and repeatability, and the laser-welded titanium-alloy housing keeps the whole sensor to HEX 8.6 × 12.2 mm and 2 g for minimal mass loading on the test structure. The adhesive base mount and top connector make it easy to install where space is tight.

Minimal mass loading

At 2 g and HEX 8.6 × 12.2 mm, the B02AM6 barely changes the response of PCBs, small components and light structures, so what you measure is the structure, not the sensor.

Miniature ASIC electronics

Built-in impedance converter with 2–20 mA constant-current excitation delivers a low-impedance IEPE output with spectral noise of 40 µg/√Hz at 100 Hz, 0.001 g rms broadband resolution and excellent long-term stability and repeatability.

Laser-welded titanium housing

Laser-welded titanium-alloy housing sealed to IP68, rated to 2,000 g rms vibration and 5,000 g pk shock, with bandwidth to 10 kHz and resonance ≥ 59 kHz. Adhesive mount with top connector, M5 or 10-32.

Key specifications