B02B10
Thru-Hole Mounting IEPE Accelerometer
Uniaxial
Sensitivity: 10mV/g
Range: ±500g
Frequency (5%): 1-10k Hz
Temp Range: -50~120°C
Connector: Side
Mount: Thru-Hole
- Fast Lead Time
Overview
The B02B10 is a miniature uniaxial IEPE accelerometer with a highly integrated built-in impedance converter that turns the piezoelectric charge signal into a low-impedance voltage output, with excellent long-term stability and repeatability and a high-frequency response. With 10 mV/g sensitivity and a ±500 g range it is the highest-range model in the family, with ±500 g for high-level vibration and moderate shock on small structures. Typical uses include vibration control and shaker testing, high-level machinery and powertrain vibration, HALT/HASS and modal work on stiff, light structures.
The built-in IEPE circuit runs from any 2–20 mA constant-current source with an 8–12 V bias. The laser-welded titanium-alloy 18.1 × 14.2 × 10 mm housing weighs just 6 g and is sealed to IP68, and a ⌀4.1 mm central through-hole lets it be bolted down with the supplied M4 screw and washer at any orientation, so the M5 side (10-32 opt.) connector can be pointed wherever the cable needs to go.
Why engineers choose the B02B10
360° through-hole mount
A ⌀4.1 mm central through-hole takes an M4 screw (supplied with washer) or an M5 stud base, so the B02B10 bolts down at any rotation and the side connector can face the cable run. Mounting torque 3.0 N·m, mounting base H03B01.
Small and light
At 6 g and 18.1 × 14.2 × 10 mm, the B02B10 adds very little mass to light structures and fits where full-size sensors cannot, while the stiff through-hole mount keeps the response flat with a resonance ≥ 40 kHz.
Built-in IEPE electronics
Shear-mode piezoceramic with a highly integrated impedance converter: ±5% response from 1 Hz to 10 kHz (±10% over 0.5 – 12k Hz), spectral noise of 40 µg/√Hz at 100 Hz, 0.001 g rms broadband resolution, rated to 2,200 g rms vibration and 5,500 g pk shock.
Typical applications
-
Modal analysis -
Vibration control and shaker testing -
General vibration measurement -
Automotive NVH and powertrain testing -
Machinery and structural vibration -
Installations where the connector must face a set direction
What’s in the box
-
B02B10 miniature through-hole accelerometer -
Product calibration certificate -
Mounting screw (M4 × 16) and M4 washer
Options & accessories
-
Optional version: B02B10-A with 10-32 output connector -
Recommended cables K14AB02 / K01AB02 (BNC) – build yours in the Cable Builder
-
Recommended mounting base H03B01
Key specifications
Other models in the BXXB10 through-hole family
Same miniature IEPE electronics, 18.1 × 14.2 × 10 mm titanium housing, central through-hole and M5 side (10-32 opt.) connector across the family. Choose the sensitivity, range and noise floor that fit your test levels.
| Sensitivity (mV/g) | 10 |
|---|---|
| Range (g) | 500 |
| Broadband Resolution (g rms) | 0.001 |
| Linearity | 1% |
| Frequency Range [5%] (Hz) | 1-10k |
| Min Frequency [5%] (Hz) | 1 |
| Max Frequency [5%] (Hz) | 10000 |
| Frequency Range [10%] (Hz) | 0.5-12k |
| Resonant Frequency (kHz) | ≥40 |
| Discharge Time Constant (s) | ≤1 |
| Transverse Sensitivity | ≤5% |
| Excitation Voltage (Vdc) | 20-30 Vdc |
| Constant Current Excitation (mA) | 2-20 mA |
| Output Impedance (Ω) | ≤100 |
| Output Bias Voltage (V) | 8-12 Vdc |
| Max Acceleration (g) | 2200 |
| Max Shock (g) | 5500 |
| Temperature Range (℃) | -50~120 |
| Min Temperature (°C) | -50 |
| Max Temperature (°C) | 120 |
| Sensitivity Temperature Coefficient (%/℃) | -0.07 |
| Sealing | Laser Welding IP68 |
| Housing Material | Titanium Alloy |
| Output Connector | 10-32 (Side), M5 (Side) |
| Mounting | Thru-Hole |
| Weight (grams) | 6 |
| Sensor Type | Thru-Hole Mounting |
| Output Type | IEPE |
| Axis | Uniaxial |
| TEDS Optional | Yes |
- Datasheet (PDF) B02B10
- Manual (PDF) Op. & Installation Guide
- Selection Guide (PDF) Accelerometer Selection Guide
- Popular Cables K14AB02 (10-32), K01AB02 (M5)
- Popular Mounting Bases H03B01
- TEDS Model 20210B





